Is Application of Nano Ceramic Coating Easy?

Over the last couple of years, any car enthusiast has noticed enough of advancements in car detailing sector. If talking precisely then, all the major advancements have been brought in surface care technology.

Nano Ceramic Coating

Nano Ceramic Coating

All the car manufacturer has started the introduction of a permanent or at least a semi-permanent car coating. Paint coating like 9H nano coating gives much better protection in comparison to any conventional car wax or old paint sealants. This add on quality surely makes them an amazing alternative for those who actually need to relieve them of frequent waxing tension. Yes, there is a tension in car wax that has turned into a drawback and that is re-application after every short time spam of 2 to 6 months. Undoubtedly, the alternative is quality-wise better than the real.

Nano Ceramic Coating:

You can call this car coating as a multifunctional coating which can be professionally used protecting the interiors along with the exterior of the surface. Few of the key factor that defines why to prefer 9H ceramic coating for your car are mentioned below:

  • Permanent Protection
  • Super Hydrophobic Effect
  • Scratch Resistance
  • Thermal Resistance
  • Weather & UV Resistance
  • Anti-Graffiti
  • Corrosion and Oxidation Resistant
  • Chemical Resistance
  • Glossier finish

Ceramic coating after application forms an invisible yet permanent bond with the painted surface of the vehicle. The best part of applying nano-ceramic coating is it doesn’t wash away or say breakdown easily. If you need to get this coating removed, you require to use abrasions as it is the only way. This protective coating is highly durable which really add extra life to your car. It protects the car against all ill factors of the environment that directly damages the appearance of the surface and health of the vehicle’s body. Few of the factors are UV rays, bird dropping, chemical etching, changing temperature, weather fluctuations, dirt, dust, grimes and even rains.

The unique formula of 9H ceramic coating permits it to be professionally applied in multiple layers. This means the coating thickness can be enhanced with simply adding an extra layer allowing a harder/thicker coating with improved and upgraded scratch resistance.

Benefits of Nano Ceramic Coating:

Nano Coating

Benefits of Nano Ceramic Coating

9H ceramic coating is considered as the best paint protection for your vehicle. It directly protects the automobile surface from harmful contaminants and UV rays. 9H Nanocoatings strictly eliminate the need for car waxing over the surface several times per year.  If comparing ceramic coating with car wax then you must be aware of the fact that this car coating is termed as a permanent coating. This means it can last until the entire ownership life. Whereas, a quality wax stays onto the surface for a maximum of six months, so, here comes a gap that can never be filled. Along with this, you can also say that it is a one-time expense whereas you need to spend on getting your car waxed again and again. The main ingredient of nano-ceramic coating is SiO2 which is Silica Dioxide that gives certain advantages like:

  • Self-Cleaning Properties
  • High Define
  • Glossier
  • Hydrophobic
  • UV Protection

Application Steps of Nano Ceramic Coatings:

Steps of Nano Ceramic Coatings

Steps of Nano Ceramic Coatings

There exist different steps and sequences when it comes to spreading and applying the durable 9H nano coating.

  • STEP 1: Rinse the Surface and Wash

Using a pressure washer or steam machine, normally rinse the exterior surface and then prefer to go for foam wash. Point to remember fact for you is that you should always start washing the vehicle from the bottom then slowly moving to the top. You must be aware of the fact that lower panels often possess the maximum dirt layer.

  • STEP 2: Decontamination

Using a tar/bug remover along with iron filling products you can very easily remove the layered harmful iron deposits. Once you use the product over the dirt layer, you will notice the changes in colour. Let the product settle for 5 minutes and then rinse off thoroughly. This step is mainly restricted to lower body parts.

  • STEP 3: Claying the Surface

Using a clay bar or say clay bar lubricant to remove the residual contaminants from the surface. you need complete clean surface before applying the Nano ceramic coating. Move the clay left to right and up to down direction for removing the contaminants.

  • STEP 4: Car Polishing

Before you step ahead to apply a 9H ceramic coating, you require to confirm the painted surface of the car is even and clean. These car coating actually seal any of the defect left over the surface but still, you need to first buff the surface. Use dual action orbital and polish the surface to finish up the thin lines, swirl marks and light scratches. The polishing process provides a nice gloss to the surface.

  • STEP 5: IPA Wipe

Spray isopropyl alcohol mix over the car’s surface and gently wipe off using a microfiber towel so as to remove leftover polishing oils. This step strictly ensures the proper bonding of the Nano ceramic coating.

  • STEP 6: 9H Ceramic Coating Application

Take few drops of ceramic coating on the applicator and gently apply it to the surface. always apply the coating in small sections so as to gain ultimate shine and protection result. Always try to leave the car overnight to dry properly.

Maintaining the Nano Ceramic Coating:

It is significant to keep up your nano-ceramic coating in the event that you need to keep up the respectability of the artistic covering. See our clay covering enumerating bundle. You need to utilize a pH unbiased cleanser and cleanser that will reset your clay covering and free contaminants. It will likewise get the paint insurance executing comparable to it can. Top off your fired covering each 2-3 months with a silica shower that will to keep up and top off your ceramic covering. Basically, shower on and wipe off. It will include more gleam and more UV insurance. Consider it to be a layer over your paint insurance, so outside issues should initially experience this layer and not influence your earthenware covering.

To know more about the application, maintenance and tips regarding 9H ceramic coating, get connected to us on 80-100-44000 or http://www.exppresscarwash.com/.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s